F&L Industries
Aluminum condenser stands, duct and return air grilles built for Florida installations.
64 product lines from F&L Industries at T&M Supplies Inc, Boynton Beach FL.
F&L IndustriesF&L Light Rooftop A/C Stands (FLLGHT)Light-duty aluminum rooftop A/C stands with 1-3/4" round posts, approved under Florida Building Code FL42154. Width is adjustable.
F&L IndustriesF&L Standard Rooftop A/C Stands (FLST)Standard aluminum rooftop A/C stands with 1.90" round posts and 5" flat bar, Miami-Dade NOA approved. Engineered 18", 24" and 30" heights are pre-approved to Miami-Dade building code.
F&L IndustriesF&L Heavy Duty Rooftop A/C Stands (FLHD)Heavy-duty aluminum rooftop A/C stands with 1.90" x 0.2" round posts, Miami-Dade NOA approved. XT models fit wide units from 32" to 42".
F&L IndustriesF&L Lead Flashing BootsLead flashing boots for sealing rooftop A/C stand legs through the roof.
F&L IndustriesF&L Aluminum I-Beams (FLBEAM)Aluminum I-beams for condenser and equipment stand assemblies. Typically cut to length; stocked in 3-foot intervals.
F&L IndustriesF&L I-Beam End Caps (FLBEAMCAP)Safety end caps for aluminum I-beams on equipment stands.
F&L IndustriesF&L Electrical Box Mounting Bracket (FLECSB613)Bracket for mounting an A/C quick-disconnect electrical box to an I-beam stand.
F&L IndustriesF&L Standard Air Handler Stands (FLS / FLW)Standard aluminum air handler stands, 22" deep, with adjustable width. FLW is the wider version.
F&L IndustriesF&L Heavy Duty Air Handler Stands (FLHD / FLHDW)Heavy-duty aluminum air handler stands, 22" deep, with adjustable width. The W models are the wider version.
F&L IndustriesF&L Foldable Air Handler Stand (FLSFOLD)Foldable aluminum air handler stand, available in two sizes.
F&L IndustriesF&L Heat Pump Stands (FLHP)Aluminum heat pump stands designed to hold up to 500 lbs, available in 3 standard sizes.
F&L IndustriesF&L Pipe Stands (FLPS)Aluminum rooftop pipe stands, single leg, in fixed or adjustable height. Double-leg stands are available for widths over 24".
F&L IndustriesF&L Double Leg Pipe Stands (FLPS)Double-leg aluminum pipe stands for runs wider than 24", in fixed or adjustable height.
F&L IndustriesF&L Square Duct Tool (SDT)Square duct tool for laying out and squaring duct.
F&L IndustriesF&L Square Duct Angle (SDA)Square duct angle supports.
F&L IndustriesF&L Triangle Wall Bracket Stands (FLWB)Triangle wall-mount condenser support brackets, engineered to pass building code in high-wind zones. Sold as a set.
F&L IndustriesF&L Mini-Split Wall Bracket (FLWBMS1818)L-shaped wall bracket stand for mini-split outdoor units. Engineering is available to help pass code in high-wind zones.
F&L IndustriesF&L Refrigerant & Gas Tank Stands (FLTS)Aluminum tank holders that fit refrigerant, oxygen, acetylene and nitrogen tanks. Can be customized to any request.
F&L IndustriesF&L Custom Equipment StandsCustom aluminum equipment stands designed with engineers and fabricated to meet building code.
F&L IndustriesF&L Galvanized Hanging Strap (FLGST)26-gauge galvanized hanging strap for duct and equipment.
F&L IndustriesF&L Snapped Collars (FLCL)30-gauge galvanized snapped (spin-in style) duct collars, 4" to 20".
F&L IndustriesF&L Nested Collars (FLCLU)30-gauge galvanized nested duct collars, 4" to 20".
F&L IndustriesF&L Insulated R4 Register Boxes (FLR4B)Insulated R4 register boxes in 30-gauge galvanized steel.
F&L IndustriesF&L Insulated R4 Register Boxes with Gasket (FLR4B...G)Insulated R4 register boxes in 30-gauge galvanized steel, with gasket.
F&L IndustriesF&L Insulated R6 Register Boxes (FLR6B)Insulated R6 register boxes in 30-gauge galvanized steel, with pre-punched holes for easier installation.
F&L IndustriesF&L Insulated R6 Register Boxes with Gasket (FLR6B...G)Insulated R6 register boxes in 30-gauge galvanized steel, with gasket, with pre-punched holes for easier installation.
F&L IndustriesF&L Insulated R6 Register Slot Boots (FLR6SB)Insulated R6 register slot boots for linear slot diffusers. Available with gasket (add G) and in R4 (1") or R8 (2"). Slot boxes can be made to any size.
F&L IndustriesF&L Round Volume Dampers with Lever (FLD)Round volume dampers with lever for balancing airflow, 4" to 14". Assembly hardware included.
F&L IndustriesF&L Galvanized U-Channel (FLUC)Galvanized sheet metal U-channel, available in 22 and 26 gauge.
F&L IndustriesF&L Can Stock (FLCS)Galvanized can stock available at any length.
F&L IndustriesF&L Galvanized Steel Drain Pans (FLDP / DP)Galvanized steel secondary drain pans with welded corners for strength. Add R for support rails or D for a PVC drain.
F&L IndustriesF&L Galvanized Refrigerant Line Covers (FLLC)8-foot galvanized refrigerant line covers in 4" and 5" square, open, angled-tip or with cap. Angle-ended covers are one complete piece.
F&L IndustriesF&L Removable Center Ceiling Diffuser (FLLAV)Square ceiling diffuser with removable center core, with or without opposed blade damper.
F&L IndustriesF&L Solid Square Ceiling Diffuser (FLLJS)Solid square ceiling diffuser with or without damper blade. FLJS-M has a multi-shutter damper.
F&L IndustriesF&L Curved Blade Ceiling Diffuser (FLL-CL1)Curved blade ceiling diffuser with or without damper.
F&L IndustriesF&L 3-Way / 4-Way Curved Blade Diffuser (FL-CL3)Curved blade ceiling diffuser in 3-way or 4-way throw, with or without damper. FLLCL-M has a multi-shutter damper.
F&L IndustriesF&L High Velocity 3-Cone Diffuser (FLL11300-A)High velocity 3-cone face ceiling diffuser without damper.
F&L IndustriesF&L High Velocity 2-Cone Diffuser (FLL1302-AFP)High velocity 2-cone face ceiling diffuser without damper.
F&L IndustriesF&L Horizontal Flow Diffuser (FLL130-AFP)Horizontal flow ceiling diffuser with 1 removable face.
F&L IndustriesF&L 4-Way Single Face Diffuser (FLLTD)4 flow direction single face ceiling diffuser.
F&L IndustriesF&L Linear Slot Diffuser (FLLSD)Linear slot diffuser for ceiling or wall, with adjustable fins.
F&L IndustriesF&L Linear Bar Grille (FLLBG)Linear bar grille for ceiling, wall or floor, with fixed 15° or 30° deflection.
F&L IndustriesF&L T-Bar Lay-In Return Grille (FLLR-TB)T-bar lay-in return grille.
F&L IndustriesF&L T-Bar Lay-In Return Filter Grille, Eggcrate (FLLRFG-TB)T-bar lay-in return filter grille with eggcrate core.
F&L IndustriesF&L T-Bar Lay-In Return Filter Grille (FLLRF-TB)T-bar lay-in return filter grille.
F&L IndustriesF&L Panel Mounted T-Bar Ceiling Diffuser (FLLJS-PLT)Panel mounted fixed core ceiling diffuser for T-bar mounting.
F&L IndustriesF&L Return Air Grille (FLLRA)Return grille with or without opposed damper blades.
F&L IndustriesF&L Return Filter Grille (FLLRF)Return filter grille with or without opposed damper blades.
F&L IndustriesF&L Door Grille (FLLDGD)Door transfer grille.
F&L IndustriesF&L Eggcrate Return Grille (FLLRA-G)Eggcrate return grille with or without opposed damper blades.
F&L IndustriesF&L 4" x 4" Air Louver (FLLOL-4)4" x 4" air louver with or without opposed damper blades.
F&L IndustriesF&L Eggcrate Return Filter Grille (FLLRF-G)Return filter grille with eggcrate center, with or without opposed damper blades.
F&L IndustriesF&L Spot Diffuser (FLLSP)Round spot (jet) diffuser.
F&L IndustriesF&L Round Eggcrate Grille (FLLVL)Round grille with eggcrate core.
F&L IndustriesF&L Round Eggcrate Grille with Shell (FLLVL-C)Round grille with eggcrate core and protective shell.
F&L IndustriesF&L Aluminum Round Ceiling Diffuser (FLLDR1000-A)Aluminum round ceiling diffuser.
F&L IndustriesF&L Double Deflection Supply Grille (FLLVH)Double deflection supply grille with or without opposed damper blade.
F&L IndustriesF&L Single Deflection Supply Grille (FLLV)Single deflection supply grille without damper blade.
F&L IndustriesF&L Single Deflection Supply Grille with Damper (FLLV-M)Single deflection supply grille with multi-shutter damper blades.
F&L IndustriesF&L Roto Louver Grille (FLLRF-G)Roto louver grille.
F&L IndustriesF&L Perforated Ceiling Diffuser, Fixed Face (FLLED1)Perforated ceiling diffuser with fixed face and fiberglass back.
F&L IndustriesF&L Perforated Ceiling Diffuser, Removable Face (FLLA2)Perforated ceiling diffuser with removable face and fiberglass back.
F&L IndustriesF&L Perforated Ceiling Diffuser with CLAIR Deflector (FLLP-1CL)Perforated ceiling diffuser with CLAIR deflector, metal back and round neck.
F&L IndustriesF&L Perforated Ceiling Diffuser, Round Neck (FLLFL)Perforated ceiling diffuser with round metal neck.